Detection Systems 7090i Instrukcje Operacyjne Strona 24

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 48
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 23
24
Initial Startup
Basic Display
Key Action How To Display/Function
Change operating
mode or cycle
Factory setting:
- Press key 1x
- Press key again
- Press key again
Automatic Mode ON
The automatic operating mode adjusts
the room temperature as set with the
timer program.
Continuous operation
D or C
Keeps the room temperature at the
selected operating level.
D Heat to comfort setpoint ON
Heating operation without timer
program to comfort setpoint
Protective functions active
C Heat to reduced comfort setpoint
ON
Heating operation without timer
program to reduced setpoint
Protective functions active
Su/Wi automatic switching (ECO
functions and automatic day heating
limit inactive with continuous
operating with comfort setpoint
Protective mode K ON
While in protective mode, the heater is
switched off but remains protected from
frost (frost-protection temperature).
Adjust room comfort
setpoint
- Use rotary knob left/right.
- Confirm with OK
or:
- Press ESC
Changes the heating comfort setpoint
during the active heating cycle.
Comfort setpoint D applied
Comfort setpoint not applied
- The basic display is depicted after
3 seconds
Press OK
- Select control side heating circuit
and:
- Set the "reduced comfort setpoint"
Reduced comfort setpoint
C applied
Tip: Wait for at least 2 hours after changing settings so that the room temperature
can adjust.
Switch potable water
operation ON or Off
- Press key 1x
Potable water operation ON/OFF
(Bar under potable water symbol visible/hidden)
- ON: Potable water is prepared according to the
selected switching program.
- OFF: No potable water preparation, protective function
is active
Przeglądanie stron 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Komentarze do niniejszej Instrukcji

Brak uwag